|
 |
|
|
PC-based Sercos III Master from Sybera
The Sybera Sercos III master fulfils the requirements of the specification 1.1.2 and is realized as an open programming system. Particular care was taken on the critical cycle timing of the Sercos III protocol management. Together with the PC based Sercos III master and the X-Realtime engine, there is no need for a separate Sercos III controller hardware, because the master protocol handling is realized directly by a PC hardware with standard Ethernet adapter(s), and with sampling rates under 100
usec.
More information
|
|
|
 |
|
For more information on the products described in
this section, please visit the Sybera web site.
|
|
|
|
|
 |
 |
|
|
|
